- Menara Sentraya #11-A6, Jakarta 12160
- +622127881929
The Izod impact tester supports a hard plastic test piece with or without a notch with a cantilever and impacts it with a rotary hammer to destroy it, measures the energy value required for destruction, and obtains the Izod impact value. The tester is used to judge the characteristics such as impact resistance, brittleness, and toughness of materials.
Applicable Standard: JIS K7110 / ISO180, JIS K7062
Hummer Take-Back Angle:150°
Combination Capacity: 1J-2.75J, 2.75J-5.5J
USED IN
The Izod/Charpy Impact Testers, the Series IM-1100 and IM-1200 are designed to measure energy value (absorbed energy value) energized for the destruction of the test piece which gets impact by a rotating hammer and destroyed. The test piece has two types in fixed size; one is with scratch and the other one is without scratch which is complied with the JIS K 7110(Plastics-Determination of Izod impact strength) and the JIS K 7111(Plastics-Determination of Charpy impact strength). This impact
tester is designed to evaluate the solid state properties about impact-resistance, frailty, tenacity, etc of the test piece figured out by Charpy impact value and Izod impact value from the cross-sectional area of the test piece and the absorbed energy value. A dial showing angle when the hammer is lifted and a dial showing Joule unit for the absorbed energy value are included as accessories.
Feature
○As the main body of the instrument is strongly built and sympathetic vibration is prevented at the
time of the destruction of the test piece, absorbed energy can be measured correctly.
○It has two different capacities of hammers as accessories.
○It has a gauge for location of the test piece as accessories.
○Main body of the instrument can be fixed by a test platform bolt.
○As it has a gauge for absorbed energy value, a conversion chart is not necessary.
| Used In | RUBBER & PLASTIC |
|---|---|
| Brand | Ueshima |
| Used In | RUBBER & PLASTIC |
